my personal recommended 3D Printers

Here is a list of the 3D printers that I think are worth recommending:

Sidewinder X2

https://artillery3d.de/artillery-x2/ (around 200€)

Longer on the market, but far better than the successor models and out of the box a very good and reliable 3D printer even for beginners for a small price.
You can also learn a lot about how a 3D printer works.

Difficulty:

Assembly 1/5
Programming 2/5
Configuration 2/5
Printing results 5/5

Bambu Lab P1P

https://eu.store.bambulab.com/de/products/p1p-de (649€)


The IPhone among the 3D printers, expensive, does what it is supposed to do without demands and you are trapped in the Bambu ecosystem, but you can adapt little to nothing to your own needs, the big plus with the Bambu is the AMS for another 400€, which allows the printer to print 4 different colors in one print without a pause (this works with all printers, but with almost all printers except Bambu, you have to set up a pause and change the filament manually). Set up, switch on, print.

Difficulty:

Setup 1/5
Programming 1/5
Configuration 3/5
Print results 5/5

Voron 2.4 r2

https://vorondesign.com/voron2.4

Kit suggestion: https://magicphoenix.xyz/product/voron-v2-4-customized-kit/

Now my absolute favorite, but in my opinion only something for experts, the Voron 2.4 r2.
You can't buy it ready-made, but you have to laboriously assemble the individual parts according to the instructions, or you buy a kit like me and 90% of people do.
It is available in different sizes or you can choose the size depending on the configuration.
But the printer also costs 1000+€
Due to the open source aspect of the printer, there are now also 100s of mods with which you can adapt the printer to your requirements down to the smallest detail.


Difficulty:

Construction 5/5
Programming 5/5
Configuration 5/5
Print results 5/5